Tips for Troubleshooting Your Irrigation System

9/17/2022 (Permalink)

Keep your irrigation system in top working condition by following these troubleshooting tips.

Follow These Troubleshooting Tips

When your commercial irrigation system in Enumclaw, WA, works well, it keeps your lawn and landscaping green and plush. If something in the system breaks down, however, it can cause costly problems. Fortunately, there are some smart troubleshooting tips to keep your system working as intended.

1. Inspect Sprinkler Heads
Sprinkler heads are damaged by lawn mowers, vehicles and foot traffic. Check each head periodically for breakage or missing features, and make sure they pop up properly. Remove dirt and debris, and replace any missing sprinkler heads right away.

2. Look for Leaking Around the Sprinklers
Zone valves within the irrigation system can become dirty or damaged over time, preventing the valves from closing all the way. Remove the valve and clean it thoroughly. If it is broken, replace it promptly.

If the leakage isn’t handled right away, water can begin to pool in areas on the lawn. Surface water can drain into the building causing serious water damage. If this occurs, call a water repair service as soon as possible to investigate the damage and determine a plan of action.

3. Check for Low Water Pressure
If you notice that water only trickles out of a sprinkler, you most likely have low water pressure. There are a couple of reasons this may occur.
The least serious of the irrigation problems could be that the backflow device’s water valves may not be fully turned on. If that doesn’t solve the problem, there may be a pipe leaking somewhere in the system. At that point, it is best to call an irrigation repair service to inspect the entire system.

4. Look for Sprinkler Zones That Don’t Turn On
Generally, this is caused by faulty electrical signals between the valve solenoids and the controller. Someone with professional electrical training should inspect the system and fix the problem.
Keep your irrigation system in top working condition by following these troubleshooting tips.